FireFly Series
Cross Web Large Zone Laser Processing
This cross-web laser processing machine was designed to laser perforate, score and cut shapes or lines on-the-fly across the web.
Designed for a Variety of Flexible Packaging Features
The BeeLine Series machines are primarily utilized for micro-perforating, venting and controlled depth scoring applications. These machines are designed to be integrated inline with slitter rewinders but can also be adapted to laminators and extrusion lines. The BeeLine series machines are built to handle web widths up to 1676 mm (66 in.) and they can have up to sixteen processing heads.
Applications
- Micro-Perforating - Modified atmosphere packaging (for burst protection and moisture release)
- Web Direction Scoring - Straight line, controlled-depth scoring in the web direction (for easy-open features)
- Microwave Venting - Controlled depth and/or through-cut line segments (dashes/slits)
Unmatched speed and flexibility.
The BeeLine Series machines can be designed and integrated into production lines such as laminators, extruders or can be set up off-line on a rewinder or slitter. Systems are adaptable with web widths up to 1600 mm (62.99′′). This series offers precise laser scoring for easy-open packaging.
AcuBreathe
Laser Perforating for Modified Atmosphere Packaging
Preco's Beam Compression Units (BCUs) are used to produce consistent geometric-shaped holes at processing speeds up to 2500 ft./min. This is the fastest perforating head in the industry.
AcuTear
Laser Scoring for Consumer Convenience
Laser scoring is a process of utilizing a focused spot of energy to remove
material to a specified depth. Preco's AcuTear laser scoring technology
provides easy-open / easy-tear flexible packaging.
MATERIALS
- Plastic Films
- Polyester
- Polyethylene
- Polypropylene
- EVOH
- Nylon
- Laminations
- Foils
- PLA
CAPABILITIES
- Laser Scoring
- Laser Slitting
- Laser Perforating
- Laser Micro-Perforating
BeeLine with Split Beam
The BeeLine Series machines combined with our beam compression technology are the ultimate high-speed laser micro-perforator. Beam compression heads perforate through holes at speeds up to 2,500 ft./min (760 m/min), over 15 times faster than other web direction series machines. Additionally, this technology enhances the processing benefits of standard industrial lasers allowing for the efficient use of lower powered lasers to produce micro-perforation holes with better quality results than higher-powered lasers at slower speed. With beam compression technology the energy received per hole is independent of the web speed thus the resulting micro-perforations are consistently round.
As the requirement for packages with improved breathability, consistent hole size and precise location continues to grow, converters are looking to Preco to provide micro-perforating solutions.
Features & Benefits
Just some of the many benefits of buying a Preco BeeLine laser machine.
Job Run From Recipe Files
Reduces set-up time; unify production from operator to operator
Bi-Level Scoring Operation
Provides added flexibility in scoring different film materials
MPLC Laser Controller
An on-the-fly controller that compensates web speed fluctuation during the entire run resulting in quality product and substantial waste reduction
Operation Status Display
On-the-job feedback including laser processing parameters, web speed and web length
Quick-Remove Optics
Easily clean lens and mirrors without causing beam misalignment
Easy CW Traverse Positioning
Quick and accurate positioning of score or perforation locations
Micro-Positioning of Beam Head
Precise positioning of focal point and ability to handle different film thicknesses
Ramp Up – Ramp Down Control
Eliminates scrap caused by the overpowering of material at slower than normal processing speeds
Closed-Loop Power Control (Optional)
Precision Control of laser energy, Unique to Preco
Tech Specs
Technical parameters are based on a baseline standard but all Preco BeeLine laser machines can be customized to meet your product's needs.
| Fixed-Focus Heads | Beam Compression Heads | |
|---|---|---|
| Venting Speed (short slit pattern) | Up to 229 m/min (750 ft./min) | Up to 457 m/min (1,500 ft./min) |
| Perforating Speed | – | Up to 762 m/min (2,500 ft./min) |
| Perforating Precision | 1:1.75 Hole aspect ratio | 1:1.2 Hole aspect ratio |
| Perforation Hole Diameter (microns) | 65 µm - 200 µm (0.0026 in. - 0.0079 in.) | |
| Scoring/Scribing Speed | Up to 762 m/min (2,500 ft./min) | |
| Lasers | 1 -10 | |
| Output Heads | 1 - 10 | |
| Cross Axis Beam Adjustment Rows | 2 Rows | |
| Machine Footprint | Split Beam: Width 3048 mm (120 in.), Depth 1525 mm (60 in.), Height 2540 mm (100 in.) | |
| FlashLite: Width 2974 mm (117 in.), Depth 1423 mm (56 in.), Height 2438 mm (96 in.) | ||
| Web Width | Standard 1676 mm (66 in.) | |
| Laser Power | Up to 400 Watts | |
| Laser Wavelengths | 9.3 µm, 10.2 µm or 10.6µm | |
| AcuFlex™ Software | Included | |
| Safety Enclosure | Class 1 | |
| Lower Web Stabilization Support | Included | |
| Process Monitoring | Requires Closed Loop Power Control | |
| Power Requirements | Controller: 208VAC, 3PH, 50/60Hz | |
| Chiller: 460VAC, 3PH, 60Hz | ||
The above data is subject to change. All specifications are dependent on laser power, material type and thickness, and process platform - consult with a Preco associate.
Laser Equipment Line for Flexible Packaging
BeeLine Series
Web Direction In-Line Laser Processing
Designed for laser micro-perforating, scoring and microwave venting in the web direction with high-speed capabilities.
FlashLite Laser Modules
Flexible System Integration
FlashLite Modules offer laser scoring and laser micro-perforating for easy-open, easy-fill and easy breathe packaging.
GET IN TOUCH CONTACT US
One of Preco's dedicated professionals will be in touch to help with your interest in the BeeLine laser machine.
Laser Equipment
715.247.3285 | Email